BRP Complete Finishing Machine
Three processes, one pass, no handling in between. The BRP deburrs, rounds the edges and then precision-grinds the surface — calibrating part thickness to a uniform, repeatable finish. Parts come off the line coating-ready, in the exact thickness your assembly expects.
- Belt + rotary brush + precision grinding unit
- 800–1,600 mm working widths
- Thickness calibration in the same pass
- Uniform, coating-ready finish
BRP Quick Facts
Configuration: Abrasive belt + rotary brush group + precision grinding unit
Working Widths: 800 / 1,000 / 1,300 / 1,600 mm
Best For: Parts that need deburring, rounding and a calibrated, uniform surface — before coating or precision assembly
Hold-Down: Magnetic (carbon steel) / vacuum (stainless steel, aluminium)
One-Pass Result: Deburred, rounded, ground and calibrated — coating-ready in one pass
Why Parts Move Between Machines — And Why They Shouldn’t
Deburred on one machine, rounded on another, ground on a third — every move costs handling time and risks fresh scratches on finished surfaces, and the thickness still varies from part to part. The BRP runs all three processes in one pass: the belt deburrs, the brushes round, and the precision grinding unit — closed-loop servo controlled — calibrates the thickness and sets the final surface before the part leaves the line.
If you only need deburring and edge rounding, the BR does that job without a grinding unit. For parts carrying slag, start with the slag removal configurations.
Inside the BRP: Deburr, Round, Grind
Station 1 · Abrasive Belt
Removes burrs and levels the surface.
Station 2 · Rotary Brush Group
Rounds contours and hole edges.
Station 3 · Precision Grinding Unit
Closed-loop servo grinding calibrates thickness and produces a uniform finish.
Hold-down for every material: a magnetic table holds carbon steel; a vacuum table holds stainless steel and aluminium flat — small parts run safely at full feed speed.
What the Grinding Unit Adds
Calibrated Thickness
Closed-loop servo grinding holds part thickness uniform and repeatable — the dimension your assembly actually fits to.
Your Choice of Finish
One consistent brushed surface in the grit you specify — 40, 80, 120, 240 or 320.
One Machine, One Pass
No re-handling between separate deburring and grinding machines: fewer marks, no queues, nothing re-fixtured.
The Finish: Your Grit, Your Surface
One machine, your choice of brushed finish — 40, 80, 120, 240 or 320 grit available.
40 GRIT
80 GRIT
BRP Is the Right Choice When…
- Parts go on to coating or precision assembly
- Part thickness has to be uniform and repeatable
- You want deburring, rounding and finishing done in one pass
- Surfaces are visible and must come out even
Choose Another Configuration When…
- You only need deburring and edge rounding: see the BR and BRB
- Heavy burrs need finishing too: see the BBRP in the Complete Finishing configurations
- You want the cleanest calibrated, premium finish: see the BRBP in the Complete Finishing configurations
- Parts carry slag: they belong on a slag removal machine first
Compare the Complete Finishing Configurations
| Configuration | BRP | BBRP | BRBP |
|---|---|---|---|
| Configuration | Belt + rotary brush + precision grinding | Two belts + rotary brush + precision grinding | Belt + rotary brush + belt + precision grinding |
| Main Result | Complete finishing with thickness calibration | Heavy-duty finishing for thick, heavy-burred parts | The cleanest calibrated finish |
| Choose It When | Parts need deburring, rounding and a calibrated, uniform surface | Burrs are heavy and the finish matters too | Premium coating-ready parts, the finest finish |
Compare all complete finishing configurations
BRP Technical Specifications
| Configuration | BRP — abrasive belt + rotary brush group + precision grinding unit |
| Working Widths | 800 / 1,000 / 1,300 / 1,600 mm |
| Main Process | Deburring, edge rounding, surface brushing, precision grinding & thickness calibration |
| Typical Parts | Laser-cut, thermal-cut, punched and sheared sheet metal parts |
| Processing Thickness | 0.5–80 mm |
| Feeding Speed | 1–5 m/min |
| Roller Brush Speed | 9–24 r/s |
| Revolving Speed | 9–24 r/s |
| Power Supply | 380 V AC, 50/60 Hz (customizable) |
| Air Pressure Required | 0.5–0.8 MPa |
| Service | CE Certified · Global Service |
All listed safety, servo-control, electrical and auto-compensation features are standard equipment.
BRP Complete Finishing Machine — Frequently Asked Questions
What does the Lasvio BRP do?
The BRP is a complete finishing machine: in one pass it deburrs with an abrasive belt, rounds edges with a rotary brush group, and precision-grinds the surface — calibrating part thickness to a uniform, repeatable finish.
What does precision grinding add that brushing cannot?
Calibration. The grinding unit is closed-loop servo controlled, so it holds the part thickness to a set, repeatable value and produces the final uniform surface. Brushing cleans and rounds — it does not calibrate thickness.
Which finishes can the BRP produce?
Brushed finishes in your choice of grit: 40, 80, 120, 240 or 320 — set the surface your coating or assembly requires.
BRP or BR — do I need the grinding unit?
If your parts go to coating or precision assembly with a thickness or finish specification, yes. If you only need burrs removed and edges rounded, the BR does that job without the grinding unit — and costs less to run.
How do I confirm whether BRP fits my parts?
Send the material, thickness target and finish requirement — or arrange a sample test on your actual parts, measured against your specification.
Send Your Parts for a BRP Finishing Test
Parts moving between three machines — or thickness that will not repeat? Send us the part details and your thickness and finish targets — or your actual parts — and we will finish them on the BRP and measure the result against your specification.
Request a Quote Chat on WhatsApp
← Previous: BRB — Belt, Rotary Brush & Belt Next: BBRP — Heavy-Duty Complete Finishing →